Building off of Good Witches of the Between, Part 7 the panels were scanned on the flatbed and two sets of 4 inch x 6 inch [10 cm x 15 cm] prints on glossy photo paper were printed out with the intention of working with the glossy surface of the photo paper in the manner Petra did in A Little Madness in the Spring, Part 2 .

One set of prints was cut into with an x-acto knife and pieces were glued onto the surface of the panels from Part 7. The panels were then scanned once more on the flatbed. Here they are.

The second set was mounted onto the 4 inch x 6 inch [10 cm x 15 cm] birch wood panels using acrylic matte medium. After drying they were trimmed and scanned. Here they are.

Finally, to this part, the bits of the photo that remained after sections were cut out and glued to the first set of panels were mounted to a third set of 4 inch x 6 inch [10 cm x 15 cm] birch wood panels using acrylic matte medium. After drying these panels were also scanned. Here they are.